خرید اینترنتی ME5200

LAG, LACP interface groups
Equal balancing of traffic in a group
Multi-chassis LAG
BFDoverLAG support, single link failure detection (RFC 7130)
Traffic mirroring - SPAN, RSPAN

Network (LAN / WAN) interfaces 32 x 10GE SFP +. Supports 1GE (1000BASE-X) mode. It is possible to use SFP transceivers 1000BASE-T
Network interfaces 4 x 40 / 100GE QSFP28. Supports 40GE and 100GE modes
Out Of Band (OOB) port 1GE (10/100 / 1000BASE-T)
RS-232 console port (RJ-45)
1x USB 2.0

Bandwidth 720 Gbps, 720Mpps
The amount of buffer memory is 8GB
RAM 16GB
MAC address table size - 750,000 (the resource is shared with MPLS switching tables and elements of single-hop BFD sessions)
Number of bridge domains up to 8K
Capacity of routing tables:
FIB: up to 4M IPv4 routes or 2.7M IPv6. The actual capacity of the FIB depends on the length of the prefixes. The resource is shared with ARP tables and IPv6 ND cache
RIB: up to 5.9M IPv4 or up to 4M IPv6 (limited by free RAM)
Number of L3 interfaces up to 8K
MPLS PW quantity up to 16K
ARP entries up to 57K
Number of VRFs (MPLS L3VPN) up to 1000 (or up to 128 with running instances of BGP processes in each of the VRFs)
Number of QoS Queues 96K

Front-to-back airflow. Three replaceable hot-swappable ventilation modules.
Two replaceable hot-swappable power supplies. AC current: 150..250V 50Hz DC current: 36..72V
Maximum power consumption - 350 W
Operating temperature range from 0 to 45 C 0
Weight - 9.8 kg
Dimensions (WxHxD) 440 x 87 x 500 mm

Providing Ethernet switching via bridged domains and cross-connects
IEEE bridging (IEEE 802.1d) support
VLAN support (IEEE 802.1q)
Q-in-Q (IEEE 802.1ad) support with the ability to manipulate tags - push / pop / swap / replace
SpanningTree protocol support (STP, RSTP, MSTP)
LLDP protocol

Supports static unicast routing IPv4, IPv6
IS-IS protocol support
OSPFv2, OSPFv3 support
Border Gateway Protocol (BGP) support
BGP Route Reflector, BDP Additional Path Support
Route filtering support (routemap, prefix-list)
Policy-based routing (PBR) support
Support for interfaces in unnumbered mode
BFD protocol support for routing protocols and static routes
IP FastReroute / Loop Free Alternate support for OSPF / IS-IS
VRRP support (version 2), DHCP relay agent
IPv4 ACL (access control lists) support for transit traffic
ECMP Load Balancing

Supports PIM-SM, PIM-SSM, Anycast RP
IGMP v2 / v3 support, SSM mapping
MSDP

Multiprotocol extensions for BGP-4 support
Label Distribution Protocol (LDP) support
RSVP-TE support, including RSVP-TE FRR and End-to-end protection
MPLS pseudowire support with PW backup functionality
L2VPN support
VPWS
VPLS LDP signaling (draft-martini)
VPLS BGP signaling (draft-kompella)
L3VPN support
L3VPN for AFI / SAFI vpnv4 unicast and vpnv6 unicast
L3VPN inter-AS optionA

Ingress and egress rate limiting (ingress policing, ingress / egress policing and shaping)
SP and DeficitWRR queuing algorithms
Weighted random early detection (WRED) support
Rate limiting, Storm Control
Up to 8 queues per logical interface, up to 32K queues per physical interface

Graceful Restart for Routing Protocols
Non-stop forwarding
Storage of two software versions on the internal storage
The ability to rollback to the previous version of the software when updating

Command Line Interface (CLI), SSH protocol support, Telnet for remote management
SNMPv1 / v2c / v3 protocol for device status monitoring
NETCONF protocol
Export of statistical data (Netflow v9, v5, IPFIX)
Configuration backup and restore (local, FTP, SFTP, TFTP)
RADIUS authentication and authorization, TACACS +, TACACS + accounting
Remote software change
Monitoring system parameters and resources
Syslog support
Time synchronization, NTP, SNTP
The ability to filter network access to control protocols (Control-plane filtering)
Ability to limit the speed of intercepting traffic on the CPU
ELTEX SLA support